Faq

Click on any of the links below… Back To Tree Care Tips

I have a new house and have never cared for trees before. What do I need to know?
  • It is best to have a professional evaluate your trees and see what recommendations are made. The following questions and answers cover some common recommendations and maintenance practices that will benefit most trees.

What are some of the benefits of maintaining my trees?
  • Trees in the urban/suburban landscape have traditionally been valued for their aesthetic qualities and shade they produce. Especially in settled areas, trees have many other important benefits.
  • Trees enhance property values. Research shows that the value of your property could increase up to 25%, depending on the size, type, location and health of its trees. Mature trees are particularly valuable. Therefore, it makes sense to protect your tree investment with proper maintenance. You may wish to document the value of your trees with photos and a professional landscape appraisal for insurance and tax purposes.
  • Landscape trees can help you save money and live more comfortably. With properly placed trees around your house, depending upon where you live, you can reduce winter heating bills up to 15%. A mature shade tree can block up to 90% of solar radiation, which could translate to a significant reduction in your home cooling cost. Trees act as windbreaks and sun screens. They reduce air pollution by producing oxygen through photosynthesis and reduce noise pollution by acting as sound barriers.
  • Studies show that trees have beneficial psychological effects on humans. They decrease stress, inspire minds and break emotional barriers. Around the workplace, they tend to lower absenteeism and improve productivity. Many hospitals and nursing homes have beautiful green trees around them, and evidence demonstrates that trees can speed recovery from illness and are good for your health.
  • Landscape appraisals can help you determine the value of your trees. A knowledgeable arborist is the best person to do appraisals. Just as a competent auto mechanic can point out needed maintenance that you might not notice, a competent, professional arborist can offer diagnosis and preventive maintenance to keep your trees in top condition.

My neighbors have told me that installing mulch rings around trees is good. Is that true?

    Yes, trees love mulch, if applied correctly.

    Mulches

  • Homeowners and professional arborists depend on mulch in landscapes for several reasons. Functionally, mulches discourage weeds from growing, conserve moisture during drought periods, and allow better use of water by controlling runoff and increasing water-holding capacity of light, sandy soils.
  • Mulches help maintain a uniform soil temperature. A 3- to 4-inch layer of mulch can add to the aesthetic value of a garden while protecting the base of trees from being injured by equipment, such as lawn mowers.
  • Mulch rings also decrease competition from lawn grass. Lawn grass, especially when lush, robs trees of valuable nutrients and moisture.
  • Many organic materials can be used as a mulch. Bark mulches and wood chips are the two most commonly used mulches in most of the country. In the south, pine needles are included in that list.
  • Mulch can be applied just about any time of the year when trees and shrubs are being planted. The best time, however, to apply mulch in established bed areas would be in mid-spring when the soil temperature has warmed up enough for sufficient root growth. If applied earlier, the mulch will keep the soil temperature lower and root growth could be delayed.
  • Mulches should be applied 2 to 3 or 4 inches in depth over relatively clean, weed-free soils. Do not pile mulch more than 4 inches. Identify and eradicate the weeds before the mulch is applied. Keep mulch pulled 12 inches back from the tree trunk.
  • Most arborists consider organic mulches as the most compatible with trees. There are, however, several inorganic materials used as mulches. These include weed barriers.
  • Black plastic is sometimes used to discourage weeds, however it interferes with the normal oxygen and water supply to the tree’s roots. When the plastic is used, a very shallow root system is created and during drought periods the plants may not withstand the stress. It is recommended not to use black plastic around trees.
  • There are, however, several landscape fabric “mulches” available that will function the same as plastic, but allow for normal water and oxygen exchange. These materials, sometimes called geotextiles or weed barriers, are placed on bare soil around trees and shrubs with mulches used on top. There are many brands and types of materials from which to choose. They have proven to be beneficial in discouraging weeds and conserving soil moisture.

Can my tree really be damaged by a lawn mower?
  • Yes, trees often are wounded by careless use of yard equipment like lawn mowers, weed whips, and other trimming equipment. These injuries cut through important vascular tissue just inside the bark, which can lead to decay and ultimately death of the tree. A bed of mulch around the tree eliminates the need to trim or mow close to the tree’s base. Extreme care should be taken when digging up or tilling the soil under a tree. Many large and small roots will be cut by such digging, especially if it occurs close to the trunk.

Why should my trees be pruned?

    Pruning trees, especially when younger, helps promote healthy trees with good branch architecture. Again, think of a tree in it’s native environment, the forest. There the tree is in stiff competition with other trees. It is forced to grow fast and upright to fill what is usually a very limited space. Trees growing in man-made conditions usually have much more space and less competition. They will spread out to form much broader trees than they would if located in the forest. The branch structure will often be inadequate if the tree is left to develop on it’s own. These trees can develop hazard limbs that eventually could fail, leading to an early tree death.

    Tree Pruning:

  • 1. Promotes good branch structure,
  • 2. Can correct poor branch structure,
  • 3. Reduces potential hazards,
  • 4. Improves overall health by removing dead, diseased, and dying branches,
  • 5. Gives the arborist a chance to examine the tree more closely than possible from the ground.

How do I know if my arborist will prune it correctly?

    Ask the arborist if they prune according to the American National Standards Institute standard for tree pruning, called ANSI A300 – Part 1 Pruning.

    ANSI A300 Part 1 Pruning

    This standard requires that the recommended use of certain tools, cutting techniques, and pruning methods be followed and sets the standard definitions for terms the arborist will use in your estimate. Estimates for tree pruning should be written in accordance to ANSI A300 standards. Properly written ANSI A300-Part 1 Tree Pruning work estimates should include, at a minimum, the following information:

  • 1. A statement that says all work will be performed in accordance with ANSI A300.
  • 2. A statement with a clearly defined pruning objectives,
  • 3. The type of pruning to be performed,
  • 4. Size specifications of the minimum and/or maximum branch size to be removed.
  • In addition to the information given on the work estimate, ANSI A300 Part 1 Pruning sets some guidelines for basic pruning practices that arborist should follow. If an arborist is adhering to the ANSI A300 Part 1 Pruning standard they:
  • 1. Will not leave branch stubs,
  • 2. Will make few or no heading cuts,
  • 3. Will not cut off the branch collar (not make a flush cut),
  • 4. Will not top or lion’s tail trees,
  • 5. Will not remove more than 25% of the foliage of a single branch,
  • 6. Will not remove more than 25% of the total tree foliage in a single year,
  • 7. Will not damage other parts of the tree during pruning,
  • 8. Will not use wound paint.

I have a newly planted tree. Should I prune it?

    It is generally recommended that some limited pruning be done at the time of planting.

    Newly Planted Trees

  • Generally, when a young tree is planted, dead, broken, and split branches should be removed.
    Once the tree is established (up to one year or more after planting) a central trunk or leader or well-spaced multiple trunks or leaders should be developed by removing competing leaders and heading or thinning vigorously growing branches that compete with the selected leader(s). Branches should be retained on the lower trunk to increase taper.

I have two different recommendations from arborists on how to prune my newly planted trees. Why is this?
  • Some arborists prefer to limit the amount of pruning done to a newly planted tree to give it a chance to get established. In this case the pruning will be limited to dead, dying, or diseased branches. This is the best option if the arborist will continue to care for the tree, making return visits in the future.
  • Other arborists may recommend pruning to shape your tree for good branch development at the time of planting. This is probably the best option if no additional care will be given to the tree in the near future.

A neighbor said my tree care company should have used pruning paint to seal the cuts. Is this correct?
  • In the past, part of the standard recommendation was to apply a generous coating of a tree wound dressing to all fresh cuts. It was believed this would prevent decay-causing infection. However, research by the United States Forest Service Northeastern Forest Experiment Station proved that this practice works against nature’s design and the trees’ best interest. Research has proven that all of the wound dressings currently available do nothing to prevent decay, and some serve as a food source for microorganisms. They also can hold moisture against the cut wood, promoting the growth of decay-causing microorganisms. A light coating of non-toxic wound dressings can be used for cosmetic purposes.
  • Wound dressing may also be recommended in some unique, limited situations, such as to control mistletoe or to discourage borer infestation that could spread diseases like Dutch Elm Disease. Consult your arborist for more information.

How do trees close pruning wounds? Why didn’t my tree care company cut the limb right back to the trunk?
  • When a tree is wounded, it sets up defensive walls against the invasion of decay fungi and other microorganisms. The vessels near the wound are plugged with gums, resins, and chemicals that resist the spread of decay. This creates protective walls within the tree. When decay develops in a branch, it moves down the branch until it reaches the protective walls. Once there, it stops.
  • Generally, if the tree is healthy very “strong” walls can be erected and the decay can be stopped. If a tree is not healthy, it’s wall will not be as “strong.” Some trees have “genetically weaker” walls and do not do a good job at stopping decay
  • After initially forming the “walls,” the tree then attempts to cover over the wound with what is called woundwood.
  • For branches and limbs, a region called the branch collar is where this protective chemical zone is located. The branch collar is located at the base of the branch or limb. Sometimes it can be seen as a slightly swollen area.
  • When the branch collar is removed during pruning, such as when a cut is made flush to the trunk, it is called a flush cut. Flush cuts greatly increase the chance of the trunk becoming infected by decay and canker-causing microorganisms. Removing the branch collar (making a flush cut):
  • 1. Removes the protective chemical zone;
  • 2. Exposes the trunk to decay organisms;
  • 3. And creates a larger area for the woundwood to cover, exposing the wound for a longer period of time.
  • A properly made pruning cut, called a collar cut, leaves the branch collar in tact. This results in a doughnut-like ring of woundwood forming all the way around the wound. With this type of pruning cut closure may take only a few months for small wounds.
  • Larger wounds may take years to close, or may not close at all.

Should I have my tree topped?

    The short answer is no. Topping, tipping, heading back and dehorning are all terms used to describe severe cutting back of a tree’s crown. It is a poor arboricultural practice and should not be used for healthy tree maintenance.

    Topping:

  • 1. Destroys the trees branch structure
  • 2. Gives multiple points of entry for wood decay organisms
  • 3. Can turn your tree into a hazard, creating a liability for which you could be held responsible
  • For branches and limbs, a region called the branch collar is where this protective chemical zone is located. The branch collar is located at the base of the branch or limb. Sometimes it can be seen as a slightly swollen area.
  • When the branch collar is removed during pruning, such as when a cut is made flush to the trunk, it is called a flush cut. Flush cuts greatly increase the chance of the trunk becoming infected by decay and canker-causing microorganisms. Removing the branch collar (making a flush cut):
  • 1. Removes the protective chemical zone;
  • 2. Exposes the trunk to decay organisms;
  • 3. And creates a larger area for the woundwood to cover, exposing the wound for a longer period of time.
  • 4. Does not limit tree growth as advertised by tree toppers.
  • Though topping often leads to many large, fast-growing sprouts, these sprouts are attached to stubs that soon become rotten. The sprouts then become hazards as they grow larger.
  • The common reason given for topping is to limit the growth of a tree, but this does not occur. In reality, the fast-growing, vigorous watersprouts will actually outgrow a similar-sized tree that has not been topped in about 5 years after the topping

Should I have my trees lion’s tailed?

    Again the short answer is no. Lion’s tailing is the “gutting-out” of a tree by removing a large number of the inner branches. The limb’s of the tree look like a lion’s tail after pruning. The limbs will appear “long and slender” with a “puff” of foliage at the end.

    Lion’s tailing:

  • is a form of over-pruning, too much foliage is removed so that the health of the tree could be jeopardized;
    leaves too much weight at the end of the branch;
  • exposes the inner portion of the tree to sunburn and growth of watersprouts;
  • may make your tree a hazard since the branches may become weak and break
  • Tree pruned according to ANSI A300 Part 1 Pruning standards cannot be lion’s tailed because not more than 25% of foliage can be removed in a single year and 50% the foliage should remain evenly distributed in the lower 66% of the canopy.

When is the best time to prune trees?
  • The old arborist saying goes, “the best time to prune is when the pruners are sharp.” Meaning that trees can be pruned at any time. This is still true for most trees, although there are some points to consider and some limited exceptions to the rule.

My neighbor said I should only prune trees in fall or winter. Is this true?

    Pruning trees does not have to be limited to fall or winter. Granted, fall and winter are good times to prune as the tree is dormant.

    Points to consider when deciding when to prune:

  • 1. Spring flowering trees can be pruned as soon as the leaves turn dark green and harden to avoid cutting off any of the following year’s flower buds.
  • 2. Summer flowering trees can be pruned before new growth begins in early spring to avoid cutting off any of the current year’s flower buds.
  • 3. Palms are often pruned in the spring so that flower stalks can be removed before they produce messy fruit.
    Birches, dogwoods, elms, hackberries, magnolias, maples, poplars, walnuts, willows, and a few other trees are known as “bleeders”. When these species are pruned in late winter or early spring, the wounds may bleed. This flow of sap is more unsightly than damaging to the tree. In fact, sap at this time of year is roughly 98% water and 2 % sugar, so little energy is lost through a bleeding wound. The sap flow will taper-off and cease as the new leaves turn dark green and harden. Pruning these trees could be delayed until the leaves turn dark green and harden if you have aesthetic concerns.
  • Exceptions:

    There are a few trees susceptible to insect and disease problems that could be encouraged if pruning is done at the wrong time.

  • The most common example is Dutch Elm Disease. This disease has devastated the nation’s population of American elm trees. The fungal disease is spread primarily by the elm bark beetle (elms growing close together can spread the disease through their roots). The beetle is attracted to fresh pruning cuts when it is active in mid to late spring and early summer. It bores into the wood, spreading the fungal disease. Pruning of susceptible elms should not be done during this period to avoid attracting elm bark beetles.
  • Similar diseases and infestations carried by boring beetles, but less widespread than Dutch Elm Disease, are Oak Wilt, most serious in the Mid-West and Texas, and Pine Wilt Nematode and Blue-Stain Wilt of pine, most serious in the Southeast.
  • Eucalyptus borer infestations can be a problem for eucalyptus trees in the western United States.
  • Tree care professionals may recommend that pruning of susceptible pines, oaks, and eucalyptus trees be avoided 1) when boring beetles are active and 2) if diseases they might carry are prevalent in your area.
  • Fireblight is a very different disease, but it’s spread can be avoided by correct timing of pruning. Fireblight is a bacteria that infects ornamental and fruit trees in the Rose family. It is most serious on apples, crab apples, and pears. The disease is spread by rain water, especially when the trees are in flower. Avoid spreading this disease by not pruning when these trees are in flower or when it is raining.
  • Similar diseases spread by rainfall are Cytospora Canker of spruce, most serious in the northern tier of the United States. Avoid pruning spruce when it is raining if Cytospora canker is a problem in your area.
  • Avoid pruning these trees during rainy weather:

  • 1. Rose family trees such as apples and pears
  • 2. Spruce
  • 3. Honeylocust

Do my trees need water?
  • That depends. Your trees will need watering if they are newly planted or your area is suffering from drought conditions. If you are receiving normal or close to normal rainfall for your area, then you should not have to water your established trees.
  • Exception: If you live in a dry or desert area, or have sandy soil, and someone has planted a tree not suited for these conditions, then the trees may require more water than even normal rainfall can provide to survive. Depending on the cost and availability of water in your area, it may be better to replace such trees with others better adapted to your local environment. See Selection and Planting of Trees.
  • Installing mulch will conserve soil moisture and reduce the amount of water needed. See Mulches.
    If you are installing an irrigation system you need to consult a professional arborist to be certain that first, the installation will not harm existing trees, and second, that the irrigation programming is set for the tree’s watering requirements, not just the turf grass.
  • Watering

  • Moisture is critical to trees, but too much moisture can cause serious damage. The amount of water to apply depends on the tree.
  • Watering newly planted trees:

  • Watering should be done at the time of planting to settle the soil and to assure adequate soil moisture. The first watering is normally done by the planting crew soon after planting. After the first watering, adequate water must be provided by the property owner unless there has been sufficient rain to keep the soil moist. The critical months for watering are May through September (this period of time may be extended in warm climates).
  • Selecting the proper plant is very important for dry, desert-like climates to avoid heavy watering requirements. It is usually recommended to choose plants that are suited for dry conditions, this type of landscaping is called xerophytic.
  • Most trees need to be watered for 2 or 3 years after transplanting to provide adequate soil moisture while root systems are becoming established. In the past it was recommended that a “saucer” be formed around the soil ball to make a water-holding reservoir. Recent studies have shown that this practice actually encourages roots to stay in the area of the soil ball instead of growing into the surrounding soil. This can increase the time it takes for the tree to get established in the landscape. It is now recommended that the root ball and surrounding area of a newly transplanted tree be watered.
  • To determine the level of moisture, remove a small amount of soil at the edge of the ball with a hand trowel and squeeze it. If you can form a moist sticky ball, it is too wet. If it crumbles like chalk, it is too dry.
    You must provide enough water to keep at least the top 4 inches of soil moist. The exact amount of water needed will vary.
  • A 3-inch diameter tree moved by a tree spade may require 60 to 80 gallons of water every 10 days if rain does not occur.
  • Distributed soils are frequently high in clay subsoil and tend to drain poorly. If these conditions exist, watering for a prolonged period of time may result in over watering and cause the roots to drown from lack of adequate soil aeration. Adding large quantities of water too frequently to heavy clay soils is detrimental and will result in death of the tree. Conversely, waiting until the tree wilts and the leaves start to turn brown is too late to water.
  • Watering established trees:

  • Large trees can be watered with lawn sprinklers. Apply water at rate of 1 inch per watering, 2 inches if there is vigorous lawn grass near and under the tree. Water at a rate low enough to keep water from running off.
    Do not water daily, this can damage your tree by suffocating it’s roots. Instead plan your watering based on the severity of the drought conditions. Generally anywhere from once every two weeks to once every 4 to 5 days will suffice.
  • Most tree roots are not very deep (within the upper 4 to 8 inches of soil), and deep roots will receive water if enough is applied to the soil surface.
  • Tree roots can extend away from the tree at a distance as far as the tree is tall, and in many cases much farther.Therefore, it is usually beneficial to water the entire yard to be certain the tree is watered. You can also alternate the sides of the tree you water, from one watering to the next, making tree watering easier while conserving water.

How does the arborist determine when to fertilize? Why does my tree need a soil test?
  • Arborists have a number of tools at their disposal. The best is the arborist’s knowledge of local soil and environmental conditions. The arborist may be able to make a fertilization recommendation simply by examining your tree and yard. This saves the client time and money. On other occasions the problem may be more complex and the arborist will recommend a soil and/or foliar analysis to determine the problem.
  • Your arborist does know that most shade trees growing in landscape settings will need nitrogen. Nitrogen is not stable in the soil. It is easily washed away by water and may periodically need to be replaced.

The arborist said the problem with my tree isn’t lack of nutrients but soil pH. What does that mean?
  • Before recommending a fertilizer, the arborist may note that other problems need to be addressed. An improper soil pH often makes it more difficult for a tree’s roots to absorb needed nutrients, even when those nutrients are abundant in the soil. Generally a pH range of 5.2-6.2 is the most desirable. Acid soils are sometimes limed to raise the pH, but more commonly, basic soils are treated with sulfur to adjust the pH downward. Maintaining a soil pH range of 5.2-6.2 for shade trees generally insures that essential plant nutrients will be available to the tree.

How do I know if the arborist is using the correct type of fertilizer at the correct rate? What is the fertilization standard, ANSI A300 – Part 2?
  • BFirst, ask the arborist if they are applying fertilizer in compliance with the American National Standards Institute standard for tree fertilization, called ANSI A300 – Part 2 Fertilization
  • ANSI A300 – Part 2 Fertilization
  • This standard requires that certain types, rates, and application methods be followed and sets the standard definitions for terms the arborist will use in your estimate. Estimates for fertilization should be written in accordance to ANSI A300 Part 2 Fertilization standards

What is a nutrient deficiency and why does it need to be corrected? What is iron chlorosis?
  • Just like people, trees can have nutrient deficiencies that lead to problems. The deficiency may cause the tree to exhibit predictable symptoms that the arborist can use to diagnose the problem. Other times testing and analysis may be required to determine the exact nature of the problem.
  • Here is an example of a common nutrient deficiency. Many trees suffer from iron deficiency induced by poorly drained or compacted soils or by soils with a high calcium content. These soils are characterized by pH levels above 7.5. The unavailability or non-utilization of iron commonly causes a condition called iron chlorosis, and is characterized by yellow leaves, slow growth, and branch dieback. Pin oak and silver maple frequently show this condition
  • This standard requires that certain types, rates, and application methods be followed and sets the standard definitions for terms the arborist will use in your estimate. Estimates for fertilization should be written in accordance to ANSI A300 Part 2 Fertilization standards
  • Chlorotic trees exhibit partial or complete yellowing of the leaves. The yellowing first occurs between the veins, leaving a network of darker green veins on a greenish-yellow background More severe symptoms include smaller than normal leaves that turn pale yellow and develop angular brown spots between the veins. Leaf margins may turn brown. The leaf eventually curls, dries up, becomes entirely brown, and falls. Tips of affected branches may die, especially in the tops of broadleaved trees. If the condition is not corrected, it can cause poor root development, severe stunting, and plant death. Weakened plants also are very susceptible to other diseases and insect infestations. On junipers, pines, and other evergreens, chlorosis usually develops as an overall yellowing of needles.
  • Under alkaline conditions (soil pH above 7.0), iron changes to insoluble forms that are less available to growing plants. Iron is more soluble and most readily absorbed from the soil at a pH range of 5.0 to 6.5. Lack of available iron is aggravated by: 1) low temperature and high soil moisture, 2) relatively large amounts of copper, manganese or zinc, and 3) excessive phosphorus applications.Correcting Iron Chlorosis
  • There are three methods of applying iron salts to correct iron chlorosis in plants. They are:
  • 1) applying a mixture of dry ferrous sulfate (iron sulfate) and sulfur to soil
  • 2) spraying the foliage with a solution of ferrous sulfate or iron chelate, or 3) introducing iron salts into the main stem or trunk of affected plants by implantation or injection.
  • This is a case where the arborist might recommend a foliar spray or trunk injection to save the tree in the short term, and then recommend other treatments to correct the real cause, the high soil pH, in the long term.

Can competition from other plants harm my tree? What is allelopathy?
  • Often little thought is given to the effects of altering plant communities. For example, it is uncommon to see an attractive sugar maple growing in an attractive bluegrass lawn. Either the healthy sugar maple shades out the grass or the tree slowly declines due to competition from the lush, highly competitive grass.
    Allelopathy, the release by one plant of substances toxic to nearby plants, can also be a factor. Some allelopathic relationships, such as the effects of walnut on rose, are well known, but many are poorly understood.

When is the best time of year to perform basic tree care operations?
  • Many tree care activities can be carried out all year long. For other activities there is a season.
  • Spring and summer give us the best opportunities to identify tree health problems, since a cursory inspection can tell whether the tree “looks” healthy compared to previous years or nearby trees of the same species. Diagnosis of the actual cause of the tree malady is a tricky business best left to an expert. As with human illness, prompt detection and treatment can be critical.
  • Most pest management activities have a very specific and narrow window of treatment that coincides with when the pest is active on the plant and/or vulnerable to the treatment. Fertilizers are best applied when the plant roots can actively uptake the nutrients. Of course, the use of fertilizers on shade and ornamental plants should be restricted to situations in which there is a nutrient deficiency.
  • Some will argue that, in temperate areas, fall and winter are the best times to prune. When the tree is bare, its branch architecture is easier to observe, so problems can be more readily corrected. Proper pruning at other times of the year will generally do no harm to trees, but there are exceptions. For instance, pruning an American elm when the beetle that carries Dutch elm disease is busy flying from infected to healthy host trees greatly increases the elm’s chances of infection. Pruning of deadwood only does not have the same effect and can be carried out any time.

What is a tree?
  • A tree is a complex, living organism. There are many different definitions for a tree and for each you can probably think of some exceptions. Webster’s defines a tree: 1 a : a woody perennial plant having a single usually elongate main stem generally with few or no branches on its lower part. It also defines a shade tree: a tree grown primarily to produce shade.
  • In general it can be said that trees:
  • 1. Are perennial plants
  • 2. Have relatively long life spans
  • 3. Have woody trunks
  • 4. Have bark for protection
  • 5. Have leaves to produce their own food
  • 6. Have roots to gather water and mineral nutrients
  • Specifically trees can be divided into three categories:
  • 1. Conifers usually have:
  • Cones, or cone-like structures, instead of flowers
  • Evergreen leaves that are needle-like, scale-like, strap-like, or awl-shaped (there are some conifers that shed their leaves every fall, these trees are termed deciduous)
  • Soft wood
  • 2. Shade trees usually have:
  • True Flowers
  • Deciduous leaves of various shapes (there are evergreen shade trees, especially in tropical areas)
    Hard wood
  • 3. Plants that grow like, or are trained to grow like trees. Examples:
    Palms
  • Tree Ferns
  • Tree Hydrangea
  • Interesting Note: Palms are routinely considered trees, although technically they are more closely related to your lawn grass than any shade tree or conifer!

What can I do about my messy ginko trees?
  • Trees that flower and produce fruit can be sprayed while they are flowering. You have about a two week window at this time. Spraying at the time of flowering sterilizes the flower and retards fruit production.

My trees are getting too tall! Should I have them topped?
  • NO! NO! NO! Topping severely injures and infects trees. The new shoots, which grow after topping, are usually long, thin, brittle and improperly attached. Unseen, but no less important, is the damage done to the root system. Deprived of foods stored in the crown of the tree, the roots can not obtain sufficient nutrients. In the long run, topping is very expensive and creates an unsafe and unattractive tree.

What are the procedures for removing a stump from my yard?
  • Stump removal is performed using a stump grinding machine. These machines are available at equipment rental yards or you can hire a tree service company to take care of removing the stump for you. These machines actually dig out the stump as opposed to pulling it out. For more information, see our page on

I want to transplant a 5 foot dogwood tree. How deep are the roots and what is the best way to dig it up?
  • Transplating dogwood trees is relatively easy. Success rates differ based on species, so you may want to check with a local arborist about any special considerations. To dig up the dogwood for transplanting, you will need to “trench” around the tree approx. 6″ away from the trunk and 12-15″ deep. After this is done, the root ball should break free with a good push. Place it in it’s new location (make sure you dig and prepare the hole prior to digging up the dogwood), backfill, and water immediately. Make sure you water it regularly and it should take to its new home just fine.

How long will it take a lilac tree to bloom after it has been transplanted?
  • It may take as long as two years for a newly transplanted lilac tree to resume blooming

I am growing bamboo and am looking for root barriers to slow the root spread. Any idea where I can find something?
  • There are many different types of root barriers available. You will want something that prevents root growth in a particular area, but still allow water and nutrients to move through the soil. Any landscape supply company should be able to offer you several choices. One that we have had good luck with is called Bio-Barrier. It is a mesh type material that has nodules of time release root

When transplanting a tree, what is the ratio of rootball diameter to height?
  • Generally, when you transplant a tree, the trunk diameter at breast height is used for the ratio you mentioned. The basic ratio is at least 1 foot of root ball diameter to 1 inch of trunk diameter.

Is it true that a disease is killing sycamore trees across the country?
  • I think you may be referring to a fungus called anthracnose. It commonly causes irregular dieback of leaves in the form of shriveling. It has become quite common and we rarely see a sycamore tree locally that does not have it. If theproblem is not widespread on the tree, you can prune out the infected area and dispose of it (make sure you don’t use it as mulch or compost as you can spread the fungus this way). If it has spread further than can be pruned, you may opt to use a fungicidal spray. However, fungicides have not proven to be too effective in controlling this problem.